News

HUALONG CASTING MATERIAL

Foundry special slag remover package method in foundry furnace

Release time:

2022-05-03 09:48

  The foundry special slag remover is used to sprinkle the slag remover on the surface of the molten metal in the furnace before the molten metal is released after the temperature and performance of the molten metal reach a certain standard during the casting production process. The brazing can be picked out.

http://en.sdhljtcn.com/

  If the molten metal in the furnace contains too much slag, the operation can be repeated until the molten metal meets the requirements. The dosage is determined according to the slag content of the molten iron and the quality requirements of the castings of each enterprise, as well as the operating habits of the workers before the furnace.

  The foundry special slag remover can also remove slag when sprinkled in the bag. After it reacts, it forms a film and covers the surface of the molten metal, which can remove slag and keep heat. After the molten iron is poured, the covering layer is picked out with steel brazing or left on the surface of the remaining molten metal for heat preservation.

  Foundry special slag remover for furnace slag removal: when the metal melts into molten metal, sprinkle a small amount of slag remover on the surface of the molten metal to initially remove the slag, and then sprinkle a layer of slag remover. After the reaction is sufficient, the slag is removed before being released from the furnace. Slag removal in the ladle: Sprinkle a little slag remover on the surface of the molten iron of the ladle, after removing the slag, sprinkle a little more to cover and keep warm, and then cast.

News