Casting Deslagging agent for cast steel usage and dosage
Release time:
2023-01-18 16:21
The quality of Casting Deslagging agent for cast steel has been proved by actual use, and the effect has reached the level of similar foreign products. Since all domestic raw materials are used for local production, the price is far lower than imported products.
Usage and Dosage:
Casting Deslagging agent for cast steel is simple and convenient to use. Usually, the product is sprinkled on the surface of the molten metal after the pouring bubble is filled during the casting process. It can also be used in electric furnaces. It should be sprinkled on the surface of the molten metal in the furnace at the end of smelting and before the molten metal comes out of the furnace. When the slagging on the surface is formed, it can be picked out with a steel braze. If the slag content is too much, the operation can be repeated once. The dosage depends on the slag content of the molten iron of each enterprise and the quality requirements of the castings. One ton of molten iron is 1-1.5kg. The manufacturer of Casting Deslagging agent for cast steel tells you to sprinkle it on the surface of molten metal after deslagging of molten iron, it will automatically disperse and cover the surface of molten metal, and lower with the pouring of molten iron, it will not stick to the bag or hang the bag. After the molten iron is poured, pick out the covering layer with steel brazing or leave it on the surface of the remaining molten metal to keep warm.
Previous article
Next article
Previous article
Next article
News
Qufu Hualong Casting Material Co., Ltd
Telephone:0537-4591188,19547307777
Fax:0537-4591668
Address: Guogou Industrial Park, Shimenshan Town, Qufu City, Jining City, Shandong Province
Branch: Qufubang Tuoheng Technology Innovation Co., Ltd.
Follow Us