News

HUALONG CASTING MATERIAL

Casting Deslagging agent factory for cast steel shares the characteristics that the slag remover should have

Release time:

2022-08-01 07:55

  1. Casting Deslagging agent factory for cast steel believes that the quality control is strict, the active ingredients account for more than 96%, strictly control the dust and impurities in the product, strictly control the particle size range of the product, and ensure uniform particle size, avoid ash during use, and maintain Clean production environment.

Casting Deslagging agent for cast steel

  2. After composite processing, the water content of the product is low, which avoids the splash caused by crystal water at high temperature and ensures the safety of the product.

  3. After the Casting Deslagging agent for cast steel is sprinkled on the surface of the molten metal, the part in contact with the molten metal can be rapidly melted to form a "film" with high viscosity, which can then stick and wrap the scum, which is convenient for long-distance stirring.

  4. In the process of use, it can achieve the effect of adding less amount of slag and can also achieve the effect of removing slag. A good slag remover has strong ability to gather slag and form a film, which is easy to stir up; , do not damage the wall and furnace wall;

  5. The good Casting Deslagging agent for cast steel has good expansion ratio, good coverage and thermal insulation performance, effectively covers the surface of the molten metal, does not let the surface temperature of the molten metal lose, and reduces the oxidation of alloy elements during smelting; does not change the metal composition, does not Contaminate molten metal;

  6. The high-efficiency slag remover has a low thermal conductivity, and a good thermal insulation layer is formed on the surface of the molten metal to reduce the heat loss of the solution.

  7. In terms of environmental protection, a good slag remover also has a great effect. No smoke, dust and harmful gas pollution, it can purify the environment and produce civilized production.

  The Casting Deslagging agent for cast steel found that the slag remover is usually sprinkled on the surface of the molten metal in the furnace before the molten metal comes out of the furnace after the temperature of the molten metal and its performance reach a certain standard during the casting process. pick out.

News